Voopoo drag lock unlock

In order for you to have better use of all the functions of this product, please r-422 read the operation notes and detailed functional instructions before your first use of this product.

If you have any problems with using this product, please contact our local agent or visit our official website at www. Battery Reserve Protection B. Switch Timeout Protection: 10s C. How to switch between Power and Temperature modes: Press the fire button 3 times rapidly to rotate between modes. TC Mode operating instructions: 1.

Adjust the temperature by pressing the Up or Down buttons. The temperature setting will increase or decrease in 1 degree increment. For rapid scrolling, press and hold the up or down buttons for over 2 seconds to activate accelerated scrolling. To adjust wattage while in TC Mode, press fire button 4 times rapidly to activate wattage adjustment.

The wattage can be adjusted between a range from 5W minimum to 80W. Adjust the wattage by pressing the up or down button. The wattage will increase or decrease in 1W increment. The product automatically recommends the output wattage according to the resistance of the atomizer when it detects that a new atomizer has been attached.

Note: the Fire button will still function when the device is locked. To unlock, press the Up and Down buttons simultaneously. To enter the function menu Interface press the Up and Down buttons simultaneously for 2 seconds. Press up or down button to scroll through the menu options. Press the Fire button to confirm your selection.

Make your adjustments using the up or down buttons. When finished, press and hold the Fire button for 2 seconds to confirm and save. The display will return to the main display interface.

Press up and down buttons simultaneously for 2s, the device will enter the Function Menu Interface. Press up button to select the Customization Mode. Under Power mode, the upper right comer will show the adjustment power value. Under temperature control custom mode, the upper right corner shows the adjustment temperature control value. To adjust the Power or Temperature curve, for each increment. When you have finished adjusting the curve, press and hold the fire button for two seconds to save and exit.This is something quite unexpected!

The Voopoo Mojo! So I am a bit surprised to see a lower powered internal battery mod! Fear not though this little hand size mod still has the famous Gene chip with its famous 10 millisecond firing speed.

There are Variable Wattage and Temperature Control power modes.

VOOPOO Drag 2 Manual-Instruction/Problems

With removable battery mods you would just take the batteries out but obviously this has an internal battery. It is a colourful little fella to say the least! The coil is rated at W but optimum power is W. With a 3. This is still very new so not even showing as pre-order on the usual online retailers so I have no idea what price range this will be in. However I already like the look of the Mojo — what a cutie and the bright colours are gorgeous. Is anyone having problems with their voopoo mojo spitting cotton back out?

Ive only had it for about a week and have constant problems with it. Day 1 it just leaked and leaked no matter what I tried. Now im having issues with little pieces of cotton coming off the coil. Any help or suggestions are appreciated. Is it a thing with the mojo that the tank has a gap from the mod? I went back to the shop to ask and it was like it on the few he had left in the shop.

But i am just wondering if its right for there to be a very small gap between the tank and the mod. Is it because of the connection?? It is a shame as usually Voopoo make excellent mods — however if you read all the comments on this preview a lot of people are having issues with this kit.

The mod can auto lock and people have been struggling to get it to unlock. So perhaps that is what happened with yours? Locked mode will be disabled. Re: Voopoo Mojo; I have the red one. To Unlock, use both side keys and Multifunction key and you will see an Unlocked Padlock. Click Multifunction key once! But I have had a leak problem with the Tank, which is a Top-fill Slider. I am really frustrated!

I have bought 4 Voopoo Mojo U-Force in the last 6 months and each one of them seems to have the same issue.This is a surprisingly common issue that customers have and one of the easiest to solve.

The other possible problem is that it is not charged. Simply plug the unit into a charging area using a micro USB cord.

When the device is charging it will indicate with a light. When the charge is complete, the light will shut off. This charging process typically takes minutes. There are a few common issues that could cause it to leak.

Be sure to install a coil before using your device. Sometimes if the coil is misaligned and not sitting fully into the pod system, it can leak from the bottom of the coil. Check to ensure that your coil is correctly seated in the pod to reduce the chance of it leaking. Even if you do not see a crack, if the leak is coming from near the top or sides of your pod, it is possible that the plastic has been cracked.

There is a max fill line on your tank. Be sure to never fill your tank beyond the max fill line as it will leak out the top when you use it. If this rubber cap is missing from your device, or if it has not been re-seated correctly, e-liquid could leak from the fill hole if the unit is set sideways. Over time the e-liquid will saturate your coil and begin to leak. If you are not planning on using your device for more then 24 hours be sure to empty all e-liquid.

It is best to empty all vaping devices before flying on a plane, or traveling up a large mountain. I suppose if you are in a submarine, you could also experience leaking from your vape.

Over heating the device, especially if its a full pod can cause the e-liquid to expand pushing it out through the o-rings or through the airflow holes. This is because some parts are plastic can become brittle and are then susceptible to breaking under freezing temperatures.

Be sure to check the recommended wattage for your coils they will be printed on the coils themselves, or can be viewed on our product page and ensure that you are using your device within the correct wattage. If you find your vape tasting burnt, its possible you are using an e-liquid with a very high VG level and that is too thick to saturate the wicks in the coils, leading to burning.

Try using e-liquid that has a lower VG level and higher PG level to improve the flow of your e-liquid. Try waiting at least seconds between drags to give the e-liquid time to re-saturate your coil. Sold in Canadian dollars, shipped from Canada same day at the lowest prices in Canada. We even supply a free 30ml bottle of e-liquid!

Canada Vapes is doing our part.Battery Reverse Protection B.

voopoo drag lock unlock

Switch Timeout Protection C. Over-temperature Protection D. Output Over-current Protection E. Overcharge Protection F. Over discharge Protection G. Short-circuit Protection H. Support Balance Charge with difference brand battery. The adjustable wattage is SW to 80W. Wattage Control Instruction: 5- W is normal mode, each step is 1 watt. Check the display as shown below:. The device can match the right power according to the value of resistance automatically.

Resistance range under Super Mode is 0. Voltage regulation: 0. You can switch between voltage and wattage modes in the function menu. Combination key instruction: Press up and down buttons at the same time for 1.

Press fire button and up buttons at the same time for 1. Press the up and fire buttons simultaneously will unlock the device. Press fire button and down button at the same time for 1. Press up and down buttons simultaneously for 1. Press up button or down button simultaneously to choose the function. Press the fire button to make confirmation and go to next step. You can make the adjustment according to pressing up or down button simultaneously.

When you finished the adjustment, press fire button 1. Customization Mode: Press up and down buttons simultaneously for 1. Press up and down button to choose the Customization Mode and press fire button to go into Customization Mode Interface.Horrible update.

Already disabled the stupid Game Launcher, but still not able to get rid of this. Samsung, how do I get rid of your newest feature. Go to Solution. So, I believe I finally figured this out, but time will tell. This has been fiercely frustrating.

You will see the Game Tools icon in the bottom left. Click this. View solution in original post. So, I finally figured it out.

Body detection was turned ON by default in this update. The phone will detect when you set it down, and will shortly "soft lock" the screen. To fix:. Now I cannot delete the bloody thing off my 'phone even though I do not play any games. Another 19Mb of my device memory wasted by the idiots at Samsung! This "feature" has been driving me insane. Thanks to the community for figuring it out. You rock. Thank you soooooo much.

This has been driving me crazy. Sign In. Turn on suggestions. Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type. Showing results for. Search instead for. Did you mean:. Annoying "Drag Lock icon to unlock".

Topics: S8 Screen Lock. You must be signed in to add attachments.Yes, the Voopoo Drag does have its little quirks and idiosyncrasies here and there but what mod on the market does not?

The fact of the matter is at this price point, you are getting a really great mod as far as accuracy and TC go.

voopoo drag lock unlock

I think in this is a very crowded, highly competitive, subcategory that the Voopoo Drag has definitely carved out a little niche for itself in. Lets not forget the software either. That is how good it actually vapes in TC mode.

So, if you can get past the constant branding on this mod, you will definitely find yourself getting a very satisfying, enjoyable vape from the Voopoo Drag. Not only that, but it will give you that type of vape in both power and TC mode. I am here to tell you that the Voopoo Drag is, in fact, a legitimate TC mod. This device is definitely accurate in both power and TC mode. It is surprisingly capable especially at its price point and it does fire very quickly.

Right now, I have my Aromamizer Supreme V2 sitting on top of it. I have to tell you, I am getting an absolutely fantastic temperature controlled vape. The Voopoo Drag is definitely for real in the TC department. This is what I would call a legitimate top tier TC chipset. It fires amazingly fast as well. The Voopoo Drag is right up there with some of the best boards on the market. One of my biggest complaints about the Gene chip is when using it in TC mode, it will only go up to 80 watts.

That in itself is an absolutely huge con on a watt device. It is absolutely ridiculous that Voopoo capped it at 80 watts. It really is a shame that they did this to such an awesome board. Bad move Voopoo and I really am hoping that you fix this with an update in the near future.

Really not sure about the name of this company. On the flip side, the mod does present well out of the box and it does feel like it is of quality construction. It comes in a two-tiered box and it does have that quality heft to it as soon as you pick it up. The on the Drag looks really nice. It has some sort of straight line design on the actual plate and the threading on it is stainless steel.Ever since the enormous success of the original Drag the vaping community have been anxiously awaiting an update, and that day has finally come.

It also has a 5ml max capacity. I also have a good idea of what improvements I want to see. When you open it up you get:. Immediately upon taking the Drag 2 out of the box, you notice that the design is very similar to the original Drag.

However, instead of a boxy shape with straight corners, the Drag 2 has beveled edges that feel nice to grip in your hand.

VooPoo Drag 2 Kit - Review & Tutorial

It also has slightly curved front and back plates and this makes it comfortable to hold. Ergonomically, the Drag 2 feels great and is a huge improvement over the sharp-cuts of the original. Another huge improvement on the Drag 2 is the paint quality. The original Drag was notorious for its terrible paint quality, and it was a large flaw in an otherwise amazing mod.

Thankfully, this appears to have been fixed, as the paint has held up great on my Drag 2. The resin on the front panel of the Drag 2 is very soft and smooth. I rather like this change, as I thought that the logo on the original stood out a little bit too much. The more subtle, dark logo looks much better to me.

voopoo drag lock unlock

The battery cover is attached by two strong magnets, and fits to the body of the device nicely. However, there is a little bit of wiggle room and so the battery cover does shift a bit in your hand during use. This is a little bit annoying, but not a huge deal. I can live with this one. The battery compartment of the Drag 2 is very nice and clean, and uses spring loaded contacts.

There is also a ribbon to allow you to easily remove your batteries. The positive and negative indicators are still black though.

I wish they would at least paint these in white, but overall the build quality here is just as good as the rest of the mod. Looking good so far. A nice change on the Drag 2 is its centered connector. There are three buttons on the Voopoo Drag 2: one large circular firing button, and two small adjustment buttons.

Voopoo Drag

The fire button is firm and nicely recessed for easy use, and works with just the right amount of pressure. The adjustment buttons are flat and rather tiny, but they are easy to use and work just fine. Below the adjustment buttons is a Micro-USB port for firmware updates. The screen on the Drag 2 is a nice size at 0. But if you upgrade the firmware on your Drag 2, you will have the option of adjusting the brightness.